Quick Start Guide

9
 Shutdown: Hold for 3 seconds. Then the device
vibrates for 0.5 second, and the two indicators becomes
unlit, indicating the device is shut down.
Vibration is enabled by default. You can disable vibration
via Body Camera Assistant software. Refer to User Manual
for details.
3.2 Charge
When the device is in low power, Indicator 1 flashes in red
fast, and indicator 2 stays the former status. Charge it in
time.
Steps:
1. Open the Mini USB interface cover.
2. Insert one end of USB cable to the Mini USB interface,
and the other end to the charger.
 Use the matched charger to charge the device.
 Quick charging is enabled by default. In quick charging
mode, record and other functions will be disabled. You
can disable the function via Body Camera Assistant
software. Refer to User Manual for details.
3.3 Turn on/off LED Light
When the environment is dim or dark, or in emergency
condition, you can hold to turn on LED light for light
supplement or emergency illumination. Hold the button
again to turn off LED light.
3.4 Record
 After the device starts up, press , and the device
vibrates for 0.5 second, indicating record is enabled.
 During record, hold , and the device vibrates for 0.5
second, indicating record is disabled.
If you have enabled post-record, during record, hold ,
and the device vibrates for 1 second. After the set post-
record time is up, the device vibrates for 0.5 second, and
the post-record ends. For post-record settings, refer to
User Manual for details.
3.5 Tag Important Data
You can tag the important data of the video for future
search.
During record, press to make a tag, and the device
vibrates for 0.5 second, indicating tagging starts. The
tagged files are named with IMP to distinguish with
untagged files.
 Tagging only takes effect with the current record. When
the record ends, tagging stops.
 You cannot cancel tagging after it starts.
3.6 Enable/Disable Mute Mode
You can enable mute mode, in which the indicators, LED
light, IR lights, and vibration will be disabled.
 After the device starts up, hold to enable mute
mode.
 In mute mode, hold to disable the mode, and the
device vibrates for 0.5 second, indicating the mute
mode is disabled.
3.7 Alarm
When the memory is insufficient or the power is low, the
device will alarm automatically.