Body Camera Quick Start Guide Scan the QR code for user manual.
Body Camera Quick Start Guide © 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Body Camera Quick Start Guide Regulatory information FCC information FCC compliance: Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Body Camera Quick Start Guide two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
Body Camera Quick Start Guide Safety Instruction Laws and Regulations Use of the product must be in strict compliance with the local laws and regulations. Please shut down the device in prohibited area. Power Supply Use of the product must be in strict compliance with the local electrical safety regulations. Use the power adapter provided by qualified manufacturer. Refer to the product specification for detailed power requirements.
Body Camera Quick Start Guide Lens DO NOT touch the lens with fingers directly in case the acidic sweat of the fingers erodes the surface coating of the lens. DO NOT aim the lens at the strong light such as sun or incandescent lamp. The strong light can cause fatal damage to the device. Screen Clean the screen with soft and dry cloth or other substitutes to wipe the interior and exterior surface. DO NOT use alkaline detergents. Protect the screen from scratches.
Body Camera Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text.
Body Camera Quick Start Guide TABLE OF CONTENTS Chapter 1 Introduction .............................................................................................................................. 8 1.1 Package List .............................................................................................................................. 8 1.2 Buttons and Interfaces .............................................................................................................. 8 1.3 Charge Device ..
Body Camera Quick Start Guide Chapter 1 Introduction Purpose: Body camera, a video recording system, is typically used by law enforcement officers to record their interactions with the public and gather video evidences at crime scenes. 1.1 Package List Following objects are included in package. If something loses, contact us or our supplier for it. 1 × Body camera. 1 × USB data cable. 1 × Charger. 1 × Demountable and angle adjustable clip 1 × Printed quick start guide. 1.
Body Camera Quick Start Guide Table 1. 1 Button Description No. Button Description 1 LED 1 When body camera is being charged, it is solid red. When body camera is in low battery, it flashes in red with high frequency. When body camera is recording, it flashes in red with low frequency. 2 LED 2 When body camera is starting up, it is solid green. 3 Taping Press it to start/stop taping. Hold it for 3 seconds to turn on/off fluorescent.
Body Camera Quick Start Guide Steps: 1. Open the cover of USB interface. 2. Connect body camera to the charger with the USB data cable.
Body Camera Quick Start Guide Chapter 2 Startup 2.1 Startup and Shutdown 2.1.1 Startup Before you start: Ensure the power is sufficient. If not, charge body camera. For details, refer to 1.3 Charge Device. Step: Hold Sleep/Wake for 3 seconds. Then the LED 2 turns green, the HIKVISION logo pops up, and you will hear an audible notification. All of these indicate the body camera starts successfully. 2.1.
Body Camera Quick Start Guide Figure 2. 1 Login 2.3 Menu Operation Before you start: Wake up LCD. Steps: 1. Press 2. Press to enter main menu. to enter the sub-menu. Table 2. 1 Sub-Menu Description Menu Description Playback You can play back recorded videos, pictures, and audios. Camera Settings You can set camera parameters including video resolution, bitrate, frame rate, pre-record time, post-record time, video clip time, picture quality, and video format.
Body Camera Quick Start Guide 2.5 Take Pictures Purpose: You can take pictures of the crime scenes or other situations. Step: Press ● to take a picture for current live view image. The operation is invalid in playback, quick charging, and USB communication interface. Exit the interfaces before operation. ● The picture is saved in memory in .jpg format and named by taking picture date and time. 2.6 Record and Capture Purpose: You can record the videos in crime scenes or other situations.
Body Camera Quick Start Guide 2.8 Playback Purpose: You can play back the recorded videos, pictures, and audios. Steps: 1. Enter Playback interface. Main Menu > Playback 2. If Verify function is on, you need to enter device password to get permission. Figure 2. 2 Enter Password 3. Press / to select the playback file type as Video, Picture, or Audio. And press selected type menu. Figure 2. 3 File Type 4. Press / to select data. 5. In file list, press 6. Press 7.
Body Camera Quick Start Guide Chapter 3 Configuration 3.1 Network Settings 3.1.1 Turn on Wi-Fi Purpose: You can access internet by connecting to a Wi-Fi. The function is only available to the models supporting Wi-Fi. Before you start: Configure Wi-Fi parameters in body camera assistant. For detailed steps, refer to user manual. Steps: 1. Enter Network Settings interface. Main Menu > Network Settings 2. Press / to position the cursor on Wi-Fi item. And press to enter Wi-Fi menu. Figure 3.
Body Camera Quick Start Guide 3.1.2 Set Network Transmission Parameters Purpose: By setting network transmission parameters, you can determine the resolution, frame rate, and bitrate used by iVMS platform when it views body camera image. Steps: 1. Enter Network Settings interface. Main Menu > Network Settings 2. Press / to position the cursor on Net Resolution, Net Bitrate, or Net Frame Rate. And press to enter corresponding menu. 3. Press 4. Press / to select target parameter.
Body Camera Quick Start Guide Chapter 4 Body Camera Assistant Purpose: Log into body camera via the Body Camera Assistant (hereinafter referred to as Assistant) to view device’s logs, videos, audios, and pictures, and configure parameters remotely. Get Assistant from the official website (http://overseas.hikvision.com/en/). 4.1 Install Assistant Installation package includes BodyCameraAssistant-win32.exe and BodyCameraAssistant-win64.exe. Select it according to your computer system type. Steps: 1.
Body Camera Quick Start Guide Figure 4. 2 Body Camera Assistant 4.3 Synchronize Time Purpose: You can synchronize device time with your custom time or network time. Steps: 1. Click the Device Configuration tab, and click Time Settings item in the left menu list. Figure 4. 3 Time Settings 2. You can select time synchronization type as Auto Time Synchrony or Manual Time Synchrony by checking corresponding checkbox. Auto Time Synchrony: If selected, Device Time isn’t configurable.
Body Camera Quick Start Guide You can log in to the device via iVMS platform, to monitor device, receive alarms, and so on. Steps: 1. Click the Device Configuration tab, and click Platform Settings item in the left menu list. Figure 4. 4 Platform Settings 2. Check the checkbox of Enable to enable platform connection. 3. Edit IP, Port, and Device ID. IP: The IP address of platform server you want to connect. Port: The port of platform. The default port of iVMS is 7660.
Body Camera Quick Start Guide Chapter 5 Troubleshooting Unable to start up. a) Possible Reason: Device runs out of power. Solution: Get device be charged. Unable to start recording. a) Possible Reason: Memory is full. Solution: Back up device and clear device memory. b) Possible Reason: Formatting memory error. Solution: Format the memory via assistant. For detailed steps, refer to the user manual. Unable to log in. a) Possible Reason: Password error. Resolution: Reset your password.
Body Camera Quick Start Guide UD18969B 21