Quick Start Guide

Body Camera Quick Start Guide
16
3.1.2 Set Network Transmission Parameters
Purpose:
By setting network transmission parameters, you can determine the resolution, frame rate, and bitrate used by
iVMS platform when it views body camera image.
Steps:
1. Enter Network Settings interface.
Main Menu > Network Settings
2. Press / to position the cursor on Net Resolution, Net Bitrate, or Net Frame Rate. And press
to enter corresponding menu.
3. Press / to select target parameter.
4. Press to save the settings.
3.2 Camera Settings
Purpose:
You can set the video parameters, including resolution, frame rate, bitrate, and so on.
Steps:
1. Enter Camera Settings interface.
Main Menu > Camera Settings
2. Press / to position the cursor on Video Resolution, Bitrate, Frame Rate, Pre-Record, Post-Record,
or other items. And press to enter corresponding menu.
3. Press / to select target parameter.
4. Press to save the settings.
5. Reboot device to take effect the new settings.
3.3 Positioning Settings
Purpose:
Body camera has a built-in positioning module. By turning on positioning function, the device can obtain the
latitude, longitude, and speed information.
The function is only available to the models supporting positioning.
Before you start:
Ensure the body camera locates in a place the positioning signal exists.
Steps:
1. Enter System Settings interface.
Main Menu > System Settings
2. Press / to position the cursor on Positioning item. And press to enter Positioning menu.
3. Press / to select positioning type as Off, GPS, BeiDou, or GPS and BeiDou.
4. Press to save the settings and reboot device to take effect the settings.
After device restarted, if positioning succeeded, the positioning icon in live view will turn from to .