DS-MP1302 LCD Mobile Monitor User Manual UD01737N
DS-MP1302 LCD Mobile Monitor TABLE OF CONTENTS Chapter 1 Introduction ........................................................................................................................ 6 1.1 Overview................................................................................................................................... 6 1.2 Physical Interface Introduction ................................................................................................. 6 1.3 Components ................
DS-MP1302 LCD Mobile Monitor User Manual About this Manual This Manual is applicable to DS-MP1302 LCD Mobile Monitor. The Manual includes instructions for using and managing the product. Pictures, charts, images and all otDSher information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website.
DS-MP1302 LCD Mobile Monitor Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
DS-MP1302 LCD Mobile Monitor Safety Instruction • • • • • Read, keep, and follow these instructions. Install the device in a proper place where can’t affect drivers sight. Do not place the device in a damp environment or expose it to rain. When cleaning screen, use soft dry cloth instead of damp cloth and do not use alcohol or any other chemicals. If the product does not work properly, please contact your dealer or the nearest service center, and you are not allowed to disassemble the device by yourself.
DS-MP1302 LCD Mobile Monitor Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact the dealer. This manual is applicable to following models. Series Models LCD Mobile Monitor DS-MP1302 This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice. The updates will be added into the new version of this manual.
DS-MP1302 LCD Mobile Monitor Chapter 1 Introduction 1.1 Overview Cooperated with Mobile DVR, DS-MP1302 LCD Mobile Monitor is able to present the real-time live view of the rear-view camera when the vehicle is backing off and other connected camera. The screen is touchable. You can view and switch the video from the mobile DVR, rear-view camera and other camera on the screen of the monitor. Parameters such as brightness, rear-view mirror, screen closing time, language, etc. can be configured.
DS-MP1302 LCD Mobile Monitor 5 OK Press it to confirm the selection. 6 Power switch Press it to turn on/off the monitor. 7 LCD LCD 1.3 Components The device components are listed in Table 1.2. Table 1. 2 Components Physical Interface Name 7" LCD Mobile Monitor Base Nested Box Description 7" LCD Mobile Monitor with a touchscreen. Used to fix 7" LCD Mobile Monitor for bracket mounting. Used to fix 7" LCD Mobile Monitor for embedded mounting.
DS-MP1302 LCD Mobile Monitor Chapter 2 Pin Definition DS-MP1302 LCD Mobile Monitor connects to mobile DVR with one 2*7 plug. The pin definitions are the same with Mobile DVR’s EXT.DEV interface. See Figure 2.1 and Table 2.1 for the detailed definition. Figure 2. 1 Pin Definition of EXT.DEV Table 2. 1 EXT.DEV’s Pin Definition No. Description No.
DS-MP1302 LCD Mobile Monitor Chapter 3 Connecting Cables DS-MP1302 LCD Mobile Monitor can be connected to the mobile DVR, rear-view camera and the other camera. Refer to Figure 3.1 and Table 3.1 for the cable connections. Figure 3. 1 Cable Connections Table 3. 1 Cable Connections Description No. Description 2*7 plug for connecting to the EXT.DEV interface of the mobile 1 DVR which is used to power the monitor and is integrated with the touching input signal. 2 RS-485 interface (reserved).
DS-MP1302 LCD Mobile Monitor Chapter 4 Basic Configuration You can view and switch the video from the mobile DVR, rear-view camera and other camera on the screen of the monitor. Parameters such as brightness, rear-view mirror, power saving time, language, etc. can be configured. 4.1 Displaying and Switching Video on the Screen 4.1.1 Displaying Video on the Screen Purpose: By default, the video from the connected mobile DVR is displayed on the screen of the monitor when it is started up. Steps: 1.
DS-MP1302 LCD Mobile Monitor 4.2 Configuring Parameters 4.2.3 Configuring Display Channel Purpose: By default, the video from the connected mobile DVR is displayed on the screen of the monitor when it is started up. You can change the display channel of the monitor. Steps: 1. Long press M button to enter the menu configuration interface. 2. Press ▲ or ▼ button to move the cursor to the Display Channel column. 3. Press OK button to select the Display Channel column. 4.
DS-MP1302 LCD Mobile Monitor 4.2.5 Configuring Rear-View Mirror Purpose: You can enable the rear-view mirror to display the video from the rear-view camera in left-right mirror mode. Steps: 1. Long press M button to enter the menu configuration interface. 2. Press ▲ or ▼ button to move the cursor to the Rear-view Mirror column. 3. Press OK button to select the Rear-view Mirror column. 4. Press ▲ or ▼ button to enable or disable rear-view mirror function. 5. Press OK button to save the settings.
DS-MP1302 LCD Mobile Monitor Chapter 5 Dimension 5.1 Monitor Dimension The dimension of 7" DS-MP1302 LCD Mobile Monitor is shown in Figure 5.1. Figure 5. 1 Monitor Dimension 5.2 Base Dimension The dimension of the optional base is shown in Figure 5.2.
DS-MP1302 LCD Mobile Monitor Figure 5. 2 Base Dimension 5.3 Nested Box Dimension The dimension of the optional nested box is shown in Figure 5.3.
DS-MP1302 LCD Mobile Monitor Figure 5.
DS-MP1302 LCD Mobile Monitor Chapter 6 Specifications Table 6. 1 Specifications of DS-MP1302 Model Screen DS-MP1302 Size 7" TFT-LCD Resolution 800 × 480 RGB Backlight LED Brightness Adjustable Visual angle 130° System PAL/NTSC Display mode Touch screen Mode 1: Manual switch Mode 2: Auto switch Support M (Short press to switch and long press to pop up the menu.
