Mobile Wireless Component Quick Start Guide
Mobile Wireless Component Quick Start Guide Legal Information ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Mobile Wireless Component Quick Start Guide PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Mobile Wireless Component Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Mobile Wireless Component Quick Start Guide equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
Mobile Wireless Component Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Mobile Wireless Component Quick Start Guide Contents Chapter 1 Introduction ............................................................................................................... 1 1.1 Product Introduction .............................................................................................................. 1 1.2 Overview ................................................................................................................................ 1 Chapter 2 Install SIM Card ............
Mobile Wireless Component Quick Start Guide Chapter 1 Introduction 1.1 Product Introduction Mobile wireless component, as a part of mobile video recorder, is used for installing 3G/4G SIM card and connecting 3G/4G and Wi-Fi antennas. Note Not all the mobile video recorders have this component. It is only applicable to some models. 1.2 Overview Refer to the figure below for the component overview.
Mobile Wireless Component Quick Start Guide Chapter 2 Install SIM Card Pluggable 3G/4G wireless communication module is designed for the device. Install SIM card to realize wireless communication. Before You Start Prepare SIM card and L-shaped screwdriver. Steps Note Some models support dual SIM cards. The installation method is same with that of one SIM card. This section takes example of one SIM card installation. 1. Wear antistatic gloves. 2.
Mobile Wireless Component Quick Start Guide Chapter 3 Install Antenna • Connect 3G/4G antenna, main Wi-Fi antenna, and aux Wi-Fi antenna to the corresponding interfaces of the component. • Place antenna vertically with its signal receiving end facing upward. • If the cable is too long, you can roll them up to prevent signal receiving from being affected. • Install 3G/4G antenna in vehicle windshield, seat backrest, or other non-metallic objects. Keep away from metal objects for at least 50 cm.
UD20655B