How to Guide

ManualsBrandsHikvision ManualsMobile Digital Video Recorders8-ch 1080p, H.265, 2 x HDD/SSD Mobile DVR

Title:

How to Configure Panic Button for MVR

Version:

v1.0

Date:

12/13/2016

Product:

MVR and Panic Button

Page:

1 of 5

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788

E-Mail: support@hikvision.com • www.hikvision.com

How to Configure Panic Button for MVR

1. Cable Connection

1) MVR(if there are two RS232 interfaces ，the RS232-2 interface is usually used for Alarm

Terminal connecting;

2) 6-pin serial port (MVR) to aviation convertor cable;

3) An eight-meter long extension cable;

4) The DS-1530HMI Mobile Panic button;

2. Configuration on the website

1) The RS232 should be configured like following picture:

2) The panic button is the last one of Alarm Input, the “Normal linkage” “Trigger Alarm output” linkage &

Summary of content (5 pages)

PAGE 1
Title: Product: How to Configure Panic Button for MVR Version: MVR and Panic Button v1.0 Date: Page: 12/13/2016 1 of 5 How to Configure Panic Button for MVR 1. Cable Connection 1) MVR(if there are two RS232 interfaces ，the RS232-2 interface is usually used for Alarm Terminal connecting; 2) 6-pin serial port (MVR) to aviation convertor cable; 3) An eight-meter long extension cable; 4) The DS-1530HMI Mobile Panic button; 2.
PAGE 2
Title: Product: How to Configure Panic Button for MVR Version: MVR and Panic Button v1.0 Date: Page: “Trigger Channel” also can be configured in this page; © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: support@hikvision.com • www.hikvision.
PAGE 3
Title: Product: How to Configure Panic Button for MVR Version: MVR and Panic Button v1.0 Date: Page: 12/13/2016 3 of 5 3. Configuration on the iVMS-5200 Mobile 1) In order to send the panic button alarm to the iVMS-5200 Mobile platform, follows steps should be configured with the Webpage.
PAGE 4
Title: Product: How to Configure Panic Button for MVR Version: MVR and Panic Button v1.0 Date: Page: 12/13/2016 4 of 5 3) Alarm Center Display: When the all configurations have been done, if the panic button is triggered, it will generate an alarm signal and be displayed on the alarm center of iVMS-5200 platform: © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.
PAGE 5
Title: Product: How to Configure Panic Button for MVR Version: MVR and Panic Button v1.0 Date: Page: First Choice for Security Professionals HIKVISION Technical Support © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: support@hikvision.com • www.hikvision.