User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
11.3 Congure Allowlist
Only the trusted IP addresses on the allowlist can get access to the device.
Steps
1. Go to
Conguraon → System → Security → Allow List .
2. Check Enable Allow List.
3. Click Add, enter the allowed IP Address, and click OK.
4.
Oponal: Edit or delete the IP address.
-
Select an IP address and click Modify to edit the IP address.
-
Select an IP address and click Delete to delete the IP address.
5. Click Save.
11.4
Congure SSH
SSH is disabled by default for security reasons. This seng is reserved for professional
maintenance personnel only.
Steps
1. Go to
Conguraon → System → Security → Security Service .
2. Uncheck Enable SSH.
3. Click Save.
Mobile Video Recorder User Manual
58