Quick Start Guide

Panic Alarm Station User Manual
30
2. Click the dropdown menu to select a sever type. Two sever types are available: IP4/IP6 and domain.
3. Enter the IP address which is used to communicate with the service.
4. Enter the port NO. for communicating with the service. The default port NO. for EHome protocol is 7660 and for privacy
protocol is 10001.
5. Click the dropdown menu to select the communication network. Four types are available: Auto, Wired Network Priority,
Wired Network and Wireless Network.
6. Enter the device ID where the CID report comes from.
 The length of the device ID should be 6 characters.
 Only numeric (0~9), and letter (A ~ F & a ~ f) are valid for this device ID.
7. Click Save to save the settings.
Sip Settings
Steps:
1. Click Remote Configuration > Network >Sip Config to enter the Sip configuration interface.