User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Chapter 1 Access to Client Software/Web Client
- Chapter 2 Activation
- Chapter 3 Wired Network Settings
- Chapter 4 Radar Settings
- Chapter 5 Camera Linkage Settings
- Chapter 6 Set Record and Storage Settings
- Chapter 7 Alarm Settings
- Chapter 8 Set Radar Advanced Function
- Chapter 9 View Alarm Information
- Chapter 10 System Management
- Appendix A. Radar Mounting Height Recommendation
- Appendix B. Formatting Description
- Appendix C. Indicator Description
- Appendix D. FAQ
- D.1 How to Achieve an Optimum Detection Range?
- D.2 How to Solve the Problem that the Radar is not Shown in the Device List on the Radar Page?
- D.3 How to Adjust the Sensitivity to Avoid False Alarm?
- D.4 How to Raise the Precision of Camera Tracking?
- D.5 How to Solve the Problem that No Reference Point is on the Frame While Setting the Speed Dome Initial Position?
- D.6 What is the Reason that Failed to Draw a Zone Automatically?
- D.7 What Makes a Failed Arming?
- D.8 Why Is It Required to Remove Reflective Objects from the Radar Area?
- D.9 Why Is the Camera Unable to Track the Target?
- D.10 Common Mistakes of Calibrating Camera
Chapter 4 Radar Sengs
You can add zones, and set camera tracking parameters for the radar in the Radar module of the
client
soware.
Click Control Panel → Modules Customizaon , check Radar, and click OK.
4.1 Add Map
Steps
1. Click Control Panel → Radar to enter the radar page.
2. Click Select Picture to load a map.
Note
Supported picture formats: jpg/png/bmp.
Figure 4-1 Add a Map
3. Click OK.
Note
Aer the addion is complete, a prompt will pop up: You need to set the plong scale.
Connue?
4. Click OK in the popup window, or click ... → Edit The Scale to enter the page.
Security Radar User Manual
6