User Manual

Note
Edit the scale will remove all radars on the map.
5. Click on the map to draw a straight line, select the end
posion and click again to complete the
drawing.
6. Enter the actual distance between two points.
Note
The gray word is the predicted distance range of system, for reference only.
Figure 4-2 Edit Plong Scale
7. Click Save.
4.2 Add the Radar to the Map
Aer adding the map, you need to add a radar to the map for seng radar zones.
Before You Start
Make sure that you have added the radar (when adding the device, check Export to Group) to the
client soware, and add the map.
Steps
1. Expand the device group in the le list, and then click and drag the radar onto the map.
Security Radar User Manual
7