User Manual

Unpin Unlock the radar locaon, and then you can move the radar detecon area
On Watch Set the camera watch point for the radar.
Note
For more informaon, see Set Park Funcon for Linked Camera .
Aer enabling the radar park mode, the main radar will control the camera to
return to the set watch point when no target appears within 10 seconds in the
radar
detecon area.
4.3 Add Radar Zone
Before You Start
You need to disarm the radar before the operaon. Right-click on the radar detecon area, and
click Disarm to disarm the radar.
Steps
1. In the client soware, click Control Panel → Radar to enter the page.
2.
Oponal: Check Enable Auxiliary Funcon on the upper le corner of the map. The target track
will appear on the radar detecon area. You can draw a zone with reference to the track. The
track cleared when unchecked.
3. Click … → Draw Zone Manually , and click the mouse to draw a zone on the radar
detecon
area.
Figure 4-4 Draw a Zone
Security Radar User Manual
9