User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Chapter 1 Access to Client Software/Web Client
- Chapter 2 Activation
- Chapter 3 Wired Network Settings
- Chapter 4 Radar Settings
- Chapter 5 Camera Linkage Settings
- Chapter 6 Set Record and Storage Settings
- Chapter 7 Alarm Settings
- Chapter 8 Set Radar Advanced Function
- Chapter 9 View Alarm Information
- Chapter 10 System Management
- Appendix A. Radar Mounting Height Recommendation
- Appendix B. Formatting Description
- Appendix C. Indicator Description
- Appendix D. FAQ
- D.1 How to Achieve an Optimum Detection Range?
- D.2 How to Solve the Problem that the Radar is not Shown in the Device List on the Radar Page?
- D.3 How to Adjust the Sensitivity to Avoid False Alarm?
- D.4 How to Raise the Precision of Camera Tracking?
- D.5 How to Solve the Problem that No Reference Point is on the Frame While Setting the Speed Dome Initial Position?
- D.6 What is the Reason that Failed to Draw a Zone Automatically?
- D.7 What Makes a Failed Arming?
- D.8 Why Is It Required to Remove Reflective Objects from the Radar Area?
- D.9 Why Is the Camera Unable to Track the Target?
- D.10 Common Mistakes of Calibrating Camera
Note
• Adding zones is a batch
operaon. If you only add zones to one radar, you need to right-click
on the remaining radar detecon zones and click Cancel.
• Zones can overlap, but the relaonship between low priority and high priority should be
sased. Priority is: Disabled Zone>Warning Zone>Early Warning Zone. That is, Early Warning
Zone can contain Warning Zone and Disabled Zone, and Warning Zone can contain Disabled
Zone.
• If the size of the displayed radar area is too small, you can slide the block on the Zoom in/out
bar on the
le to adjust the size of the displayed radar area.
Figure 4-5 Overlap zones
4. Right-click to complete drawing, and the system will pop up a window. Enter the zone name,
and select Early Warning Zone, Warning Zone, or Disabled Zone as the zone type.
Figure 4-6 Zone
Sengs
Security Radar User Manual
10