User Manual

Figure 4-9 Drag the Zone
5) Right-click on the zone and select Exit the sengs mode.
Note
To delete a zone, right-click the zone in the edit state and select Delete.
4.4 Add Trigger Line
You need to draw at least one trigger line for the radar detecon area and set alarm rules.
Before You Start
• The radar is added to the map.
• Right-click on the radar
detecon area, and click Disarm to disarm the radar.
Steps
1. In Radar page, click … → Draw Trigger Line .
Note
You can draw trigger line for all radars on the map.
2. Draw the trigger line.
1) Click on the radar
detecon area to draw a trigger line.
2) Select Le -> Right, Le <- Right or Le <-> Right in the pop-up window.
Note
•
Direcon determinaon: Set the starng point as the center of the circle, the trigger line is
clockwise to the right, and counterclockwise to the le.
• Up to 4 trigger lines can be drawn.
• Alarm rules: A single arrow -> indicates that the target triggers an alarm when it crosses the
trigger line in the
direcon of the arrow; a double arrow <-> indicates that the target triggers
an alarm when it crosses the trigger line in any
direcon.
Security Radar User Manual
12