User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Chapter 1 Access to Client Software/Web Client
- Chapter 2 Activation
- Chapter 3 Wired Network Settings
- Chapter 4 Radar Settings
- Chapter 5 Camera Linkage Settings
- Chapter 6 Set Record and Storage Settings
- Chapter 7 Alarm Settings
- Chapter 8 Set Radar Advanced Function
- Chapter 9 View Alarm Information
- Chapter 10 System Management
- Appendix A. Radar Mounting Height Recommendation
- Appendix B. Formatting Description
- Appendix C. Indicator Description
- Appendix D. FAQ
- D.1 How to Achieve an Optimum Detection Range?
- D.2 How to Solve the Problem that the Radar is not Shown in the Device List on the Radar Page?
- D.3 How to Adjust the Sensitivity to Avoid False Alarm?
- D.4 How to Raise the Precision of Camera Tracking?
- D.5 How to Solve the Problem that No Reference Point is on the Frame While Setting the Speed Dome Initial Position?
- D.6 What is the Reason that Failed to Draw a Zone Automatically?
- D.7 What Makes a Failed Arming?
- D.8 Why Is It Required to Remove Reflective Objects from the Radar Area?
- D.9 Why Is the Camera Unable to Track the Target?
- D.10 Common Mistakes of Calibrating Camera
Figure 4-10 Draw a Trigger Line
3. Click Cancel to complete the drawing.
4. Oponal: Edit the trigger line: right-click on the trigger line.
-
Trigger Line: L1: Display the name of the trigger line.
-
Edit: The cursor hovering over the trigger line will becomes the palm of the hand. Hold to
move the
gger line. The cursor hovering over the end of the trigger line will becomes a
cross. Click to adjust the
posion of the trigger line.
Figure 4-11 Edit the Trigger Line
-
Set Rule: Select the trigger rule.
-
Delete: Delete the trigger line.
4.5 Other Auxiliary
Funcons
Security Radar User Manual
13