User Manual

Figure 5-2 Set Inial Posion
5.2 Link the Camera to the radar
Before You Start
You need to disarm the radar before the operaon. Right-click on the radar detecon area, and
click Disarm to disarm the radar.
Steps
1. In the client
soware, click Control Panel → Device Management . Select a radar in the device
list. Click Remote Conguraon → Smart Rule Sengs → Camera Linkage Sengs to enter the
page.
Note
You can also input IP address of the radar in a browser to enter the web client. Click Smart Rule
Sengs → Camera Linkage Sengs to enter the page.
2. Add a camera.
1) Click +.
2) Enter the IP address, port, user name, password of the camera, and select whether to link to
NVR.
Note
To use the NVR for video storage, you can choose to link the NVR and congure the NVR
parameters.
Security Radar User Manual
16