User Manual

Steps
1. In the client
soware, click Control Panel → Radar → … → Master-Slave Tracking Sengs to
enter the page.
2. Expand the device group in the list on the
le and double click the radar.
3.
Select and click the live view window of the calibrated speed dome.
4. Check Enable Tracking, and click Save.
Figure 5-16 Enable Tracking
5.7 Set Park
Funcon for Linked Camera
Aer enabling the radar park mode, the main radar will control the camera to return to the set
watch point, when no target appears within a period of
me in the radar detecon area.
Before You Start
Note
Only analog cameras with watch point seng are supported.
• Add the radar to the map
• Link the camera to the radar, and add the camera to the client soware.
• Calibate the camera and enable camera tracking.
Steps
1. Enter Radar page in the client
soware.
2. Right-click on the radar detecon are. Click Set Parking Point.
Security Radar User Manual
30