User Manual

Chapter 7 Alarm Sengs
7.1 Alarm Center
You can set the alarm center's parameters and all alarms will be sent to the congured alarm
center.
Steps
1. Click Communicaon Parameters → Alarm Center Parameters to enter the Alarm Center
Sengs page.
Figure 7-1 Alarm Center Parameters
2. Select Center Group, and slide the slider to enable the center group. The alarm informaon will
be uploaded to the selected center group.
3. Select Protocol Type from the drop-down list, select Server Address Type from the drop-down
list, enter the server address, port No., and the user name.
Note
The protocol type NAL2300 is the Hikvision private protocol.
4. Click Save.
7.2
Nocaon Push
When an alarm is triggered, if you want the send the alarm nocaon to the client, alarm center,
cloud or mobile client, you can set the
nocaon push parameters.
Steps
1. Click Communicaon Parameters → Message Nocaon .
Security Radar User Manual
34