User Manual

7.5 Set Trigger Line
Steps
1. Select the radar and click Remote Conguraon in the client soware, or enter the IP address
of the radar in the address bar of the web browser. Click Alarm Module Parameters → Trigger
Line to enter the page.
2. Select an relay, and click
to enter the page. You can edit the name of the trigger line.
3. Click OK.
7.6 Set Arming/Disarming Schedule
Steps
1. Select the radar and click Remote Conguraon in the client soware, or enter the IP address
of the radar in the address bar of the web browser. Click Smart Rule Sengs → Arming/
Disarming Schedule to enter the page.
Figure 7-5 Arming/Disarming Schedule
2. Drag the mouse to draw the period bar on the me table, or click the period bar and enter the
start and end me.
Note
You can set 2 arming/disarming periods each day.
3. Click OK to save.
4. Click Delete to delete a selected period. Click Delete All to delete all periods in the
me table.
5. Click Save.
Security Radar User Manual
37