User Manual

Chapter 8 Set Radar Advanced Funcon
8.1 Set Master-slave Tracking Sengs
If the radar need mulple-radar linkage, you can arrange mulple radars for linkage detecon and
congure the radar master-slave relaonship.
Before You Start
There are at least 2 online radars.
Steps
1. Select the radar and click Remote
Conguraon in the client soware, or enter the IP address of
the radar in the address bar of the web browser. Click Radar Sengs → Master-slave Tracking
Sengs to enter the page.
2. Set the radar type and parameters.
-
If the current radar is set as master radar, you can add, edit, delete the slave radar, and set
the slave radar priority.
-
If the current radar is set as slave radar, you need to set the main radar IP address.
What to do next
When the target is appear on the radar, the target
informaon to be tracked is sent to the main
radar, and the main radar arranges linked cameras to track the target according to the set radar
priority.
8.2 Set
Detecon Angle and Range
Steps
1. Select the radar and click Remote
Conguraon in the client soware, or Enter the radar IP
address in the address bar of the web browser. Click Radar Sengs → Detecon Angle and
Range to enter the page.
Security Radar User Manual
39