User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Chapter 1 Access to Client Software/Web Client
- Chapter 2 Activation
- Chapter 3 Wired Network Settings
- Chapter 4 Radar Settings
- Chapter 5 Camera Linkage Settings
- Chapter 6 Set Record and Storage Settings
- Chapter 7 Alarm Settings
- Chapter 8 Set Radar Advanced Function
- Chapter 9 View Alarm Information
- Chapter 10 System Management
- Appendix A. Radar Mounting Height Recommendation
- Appendix B. Formatting Description
- Appendix C. Indicator Description
- Appendix D. FAQ
- D.1 How to Achieve an Optimum Detection Range?
- D.2 How to Solve the Problem that the Radar is not Shown in the Device List on the Radar Page?
- D.3 How to Adjust the Sensitivity to Avoid False Alarm?
- D.4 How to Raise the Precision of Camera Tracking?
- D.5 How to Solve the Problem that No Reference Point is on the Frame While Setting the Speed Dome Initial Position?
- D.6 What is the Reason that Failed to Draw a Zone Automatically?
- D.7 What Makes a Failed Arming?
- D.8 Why Is It Required to Remove Reflective Objects from the Radar Area?
- D.9 Why Is the Camera Unable to Track the Target?
- D.10 Common Mistakes of Calibrating Camera
Chapter 9 View Alarm Informaon
The device supports alarm informaon query and alarm event playback.
Before You Start
Record and storage
sengs are required before searching and playing back alarm events. For
details, see Set Record and Storage Sengs.
Steps
1. In the client
soware, click Control Panel → Radar .
2. Select the radar that needs to view in the le list, and then click on the right side to open the
alarm informaon query page
3. Select the date, and then click Search.
4. Double-click an alarm event in the result list. The windows of radar track playback screen and
video playback of the selected alarm event will pop up.
Figure 9-1 Alarm event viewing and playback
Security Radar User Manual
42