User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Chapter 1 Access to Client Software/Web Client
- Chapter 2 Activation
- Chapter 3 Wired Network Settings
- Chapter 4 Radar Settings
- Chapter 5 Camera Linkage Settings
- Chapter 6 Set Record and Storage Settings
- Chapter 7 Alarm Settings
- Chapter 8 Set Radar Advanced Function
- Chapter 9 View Alarm Information
- Chapter 10 System Management
- Appendix A. Radar Mounting Height Recommendation
- Appendix B. Formatting Description
- Appendix C. Indicator Description
- Appendix D. FAQ
- D.1 How to Achieve an Optimum Detection Range?
- D.2 How to Solve the Problem that the Radar is not Shown in the Device List on the Radar Page?
- D.3 How to Adjust the Sensitivity to Avoid False Alarm?
- D.4 How to Raise the Precision of Camera Tracking?
- D.5 How to Solve the Problem that No Reference Point is on the Frame While Setting the Speed Dome Initial Position?
- D.6 What is the Reason that Failed to Draw a Zone Automatically?
- D.7 What Makes a Failed Arming?
- D.8 Why Is It Required to Remove Reflective Objects from the Radar Area?
- D.9 Why Is the Camera Unable to Track the Target?
- D.10 Common Mistakes of Calibrating Camera
Chapter 1 Access to Client Soware/Web Client
You can login the Client Soware or the web client to congure the device's parameters. You can
also
congure the radar's network parameters, alarm, permission, system, log search via the web
client.
Note
You should acvate the device the rst me you access it to the network for safety reasons. For
details, see Device Acvaon.
Access to Client Soware
Download and install the iVMS-4200 client soware. Register to the soware and add device in
Control Panel → Device Management → Device for Management .
Note
• You should set the device port No. as 80.
• The user name and password when adding device are the
acvaon user name and password.
Aer the device is completely added, click Remote Conguraon to enter the device conguraon
page. You can congure the device parameters in this page.
Access to Web Client
Aer the device is connected to the network, you can search the device IP address via the
iVMS-4200 client
soware and the SADP soware. Input the searched IP address in the address bar
in the web page and press Enter. Use the acvaon user name and password to login. You can
congure the device parameters in the web page.
Security Radar User Manual
1