Quick Start Guide

ECI-B12Fx Network Bullet Camera Quick Start Guide
QSG ECI-B12Fx 031518NA 11
• CONTRAST
This feature enhances the difference in color and light between parts of an image. You can set
the CONTRAST value from 1 to 9.
• SHARPNESS
Sharpness determines the amount of detail an imaging system can reproduce. You can set the
SHARPNESS value from 1 to 9.
• SATURATION
Adjust this feature to change the saturation of the color. The value ranges from 1 to 9.
• DNR (Digital Noise Reduction)
The DNR function can decrease the noise effect, especially when capturing moving images in
poor light conditions and delivering more accurate and sharp image. You can set the DNR as
HIGH, MEDIUM, or LOW.
• AGC
It optimizes the clarity of the image in poor light conditions. The AGC level can be set as HIGH,
MEDIUM, or LOW. Select OFF to disable the AGC function.
Note:
The noise will be amplified when the AGC is on.
• MIRROR
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and vertically .
3.6 FACTORY DEFAULT
Move the cursor to FACTORY DEFAULT and click Iris+ to reset all the settings to the factory default.
3.7 EXIT
Move the cursor to EXIT and click Iris+ to exit the menu without saving.
3.8 SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to save the settings, and exit the menu