Quick Start Guide

ECI-B12Fx Network Bullet Camera Quick Start Guide
QSG ECI-B12Fx 031518NA 5
1 Introduction
1.1 Product Features
The main features are as follows:
 High performance CMOS sensor
 IR cut filter with auto switch
 OSD menu with configurable parameters
 Auto white balance
 Internal synchronization
 SMART IR mode
 3-axis adjustment
1.2 Camera Overview
Figure 1-1 Overview of Camera
Note:
Press and hold the switch button until screen goes blank (~7 seconds) to switch the video output.
Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS.
2 Installation
Before You Start:
 Make sure that the device in the package is in good condition and all the assembly parts are
included.
 Make sure that all the related equipment is power-off during the installation.
 Check the specification of the products for the installation environment.
 Check whether the power supply is matched with your power output to avoid the damage.
 Make sure the wall is strong enough to withstand three times the weight of the camera and the
mount.
 If the wall is cement, insert expansion bolts before installing the camera. If the wall is wooden,
use self-tapping screws to secure the camera.
 If the product does not function properly, contact your dealer or the nearest service center. Do
NOT disassemble the camera for repair or maintenance by yourself.