Quick Start Guide

ECI-B12Fx Network Bullet Camera Quick Start Guide
QSG ECI-B12Fx 031518NA 7
Figure 2-3 3-Axis Adjustment
1). Loosen the No.3 screw to adjust the pan position [0° to 360°]. Tighten the screw after
completing the adjustment.
2). Loosen the No.2 screw to adjust the tilt position [0° to 180°]. Tighten the screw after
completing the adjustment.
3). Loosen the No.1 screw and rotate the camera [0° to 360°]. Tighten the screw after
completing the adjustment.
3 Menu Description
Purpose:
Call the menu by clicking button on the PTZ Control interface, or click Iris+.
Steps:
1. Connect the camera to the NVR, and the monitor.
2. Power on the analog camera, NVR, and the monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking button, or click Iris+.