Quick Start Guide

D12Fx Network Dome Camera Quick Start Guide
QSG VE D12Fx 030218NA 12
Modify the IP Address 3.3
Purpose:
To view and configure the camera via LAN (Local Area Network), connect the network
camera to the same subnet as your PC.
Use the SADP software or client software to search and change the IP address of the device.
IP Address modification via SADP software will be used as an example.
In order to modify the IP address via client software, refer to the user manual of the client
software.
Steps:
1. Run SADP.
2. Select an active device.
3. Change the device IP address to the same subnet as your computer by either modifying
the IP address manually, or by checking the Enable DHCP checkbox.
Modify the IP Address Figure 3-5
Note:
Hik-Connect can be enabled during activation. Refer to Chapter 5.1 for detailed
information.
SADP supports batch IP address modification. Refer to the SADP user manual for details.
1. Input the admin password and click Modify to complete IP address modification.