Quick Start Guide

D12Fx Network Dome Camera Quick Start Guide
QSG VE D12Fx 030218NA 9
P: 0° to 355°
T: 0° to 75°
Tilt Adjusting Screw
Type I Camera 2-Axis Adjustment Figure 2-5
1) Loosen the tilt adjusting screw to adjust the tilt angle [0° to 75°].
2) Hold the black liner to adjust the pan angle [0°to 355°].
8. Reinstall the bubble and tighten the screws.
Bubble Reinstallation Figure 2-6
3 Network Camera LAN Configuration
Note:
The use of products with internet access carries inherent security risks. In order to avoid
network attacks and information leakage, strengthen your own network protection. If the
product does not work properly, contact your dealer or the nearest service center.
Wiring 3.1
Connect the camera to the network as follows:
Network Cable
or
Network Camera
Computer
Connect Directly Figure 3-1
N
e
t
w
o
r
k
C
a
b
l
e
N
e
t
w
o
r
k
C
a
b
l
e
or
or
Network Camera Computer
Connect via a Switch or a Router Figure 3-2