Quick Start Guide

D12Fx Network Dome Camera Quick Start Guide
QSG VE D12Fx 030218NA 8
Remove the Bubble Figure 2-2
4. Fix the mounting base onto the ceiling with the supplied screws.
Fix the Mounting Base Figure 2-3
5. Route the cables through the cable hole.
Note:
If required, you can route cables through the side opening on the side of the mounting
base.
Side Opening
Side Opening Figure 2-4
6. Connect the corresponding cables, such as the power and network cables.
7. Power on the camera, and set the network configuration (for details, refer to 3 Network
Camera LAN Configuration and 4 Access via Web Browser) to check whether the image is
obtained at the right angle. If not, adjust the surveillance angle.