Quick Start Guide

QSG VE ECI-D62Z2 030218NA 10
2. Route the cables through the side outlet towards the conduit.
3. Insert the conduit into the outlet and tighten counterclockwise.
Conduit
Install the Cable Conduit Figure 2-7
Note:
When mounting on a wall, position the side outlet downwards to prevent the collection of
water.
Downward
Conduit Outlet Direction Figure 2-8
Image and Focus Adjustment 2.3
Before you start:
Connect the camera to a monitor with the supplied auxiliary video output cable, and power
the camera on.
Auxiliary Video
Cable
Auxiliary Video
Output
To a monitor
Connect Camera to a Monitor Figure 2-9
Note:
For certain camera models, the auxiliary video cable is not included in the package. Instead,
you can connect the video out interface of the camera to a monitor for image and focus
adjustment.