Quick Start Guide

QSG VE ECI-D62Z2 030218NA 11
Video Out
Interface
Camera Video-Out Interface Figure 2-10
2.3.1 3-Axis Adjustment
Steps:
1. View camera output on the monitor.
2. Loosen the tilt adjusting screw to adjust the tilt angle [0° to 70°], hold the black liner to
adjust the pan angle [0° to 355°], and hold the lens to rotate the camera [0° to 355°].
Tilt: 0° to 70°
Pan: 0° to 355°
Rotate: 0° to 355°
3-Axis Adjustment Figure 2-11
2.3.2 Zoom and Focus Adjustment
Manual Adjustment:
Some camera models in this series have a zoom lens. Focus levels must be manually
adjusted via the zoom/focus lever. Use the zoom and focus levers to adjust the lens.
Steps:
1. View camera output on the monitor.
2. Loosen the zoom lever and move the lever between T (Tele) and W (Wide) to obtain the
ideal viewing angle.
Zoom/Focus Lever
Zoom/Focus Lever (Type II Camera) Figure 2-12
3. Tighten the zoom lever.
4. Loosen the focus lever and move the lever between F (Far) and N (Near) to obtain the
optimum focus.