Quick Start Guide

QSG VE ECI-D62Z2 030218NA 13
3.2.1 Activation via Web Browser
Steps:
1. Power the camera on. Connect the camera to your computer or the switch/router that
your computer connects to.
2. Input the IP address into the address bar of the web browser, and press Enter to enter
the activation interface.
Notes:
 The camera’s default IP address is 192.168.1.64.
 The computer and the camera should belong to the same subnet.
 For cameras that have DHCP enabled by default, use the SADP software to search for
the IP address.
Activation Interface (Web) Figure 3-3
3. Create and input a password.
STRONG PASSWORD RECOMMENDED – We highly recommend creating a strong
password of your own choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We recommend regularly resetting your
password on a weekly or monthly basis, especially in high security systems.
4. Confirm the password.
5. Click OK to save the password and enter the live view interface.
3.2.2 Activation via SADP Software
SADP software is used for detecting online devices, activating cameras, and resetting
passwords.
SADP can be obtained from the supplied disk or the official website, and installed by
following the prompts.
Follow the steps to activate the camera.
Steps:
1. Run SADP to search for online devices.
2. Check the device status from the device list, and select the inactive device.