Quick Start Guide

QSG VE ECI-D62Z2 030218NA 8
Memory Card
Install the Memory Card Figure 2-2
3. (Optional) Unmount the memory card by ejecting it.
Mounting 2.2
2.2.1 Ceiling Mount
Steps:
1. Fix the supplied drill template to the area where you would like to install the camera.
2. Drill three screw holes and a cable hole (optional) into the ceiling according to the drill
template.
58 mm (2.28" )
43.3 mm (1.7" )
29 mm
(1.14")
50 mm
(1.97" )
25 mm
(0.98" )
50.3 mm (1.98" )
The Drill Template Figure 2-3
Note:
If you need to route cables through the ceiling, drill a cable hole according to the drill
template. Skip this step if you want to route the cables along the ceiling surface.
3. Route the camera cables.
4. Align the holes of the back box with the drilled screw holes on the ceiling, and secure the
camera with the supplied screws.