ECI-T22F6-Quick-start-Guide

N
e
t
w
o
r
k
C
a
b
l
e
N
e
t
w
o
r
k
C
a
b
l
e
or
or
Network Camera Computer
Connect via a Switch or a Router Figure 3-2
3.2 Activate the Camera
Activate the camera by setting a strong password. Activation via web browser, activation via
SADP, and activation via client software are supported. Activation via SADP software and web
browser will be used as examples to introduce camera activation.
Note:
Refer to the Network Camera User Manual for activation via client software.
3.2.1 Activation via Web Browser
Steps:
1. Power the camera on. Connect the camera to your computer or the switch/router that
your computer connects to.
2. Input the IP address into the address bar of the Web browser, and press Enter to enter the
activation interface.
Notes:
 The camera’s default IP address is 192.168.1.64.
 The computer and the camera should belong to the same subnet.
 For cameras that have DHCP enabled by default, use the SADP software to search for the
IP address.
Activation Interface (Web) Figure 3-3
3. Create and input a password.
STRONG PASSWORD RECOMMENDED – We highly recommend creating a strong
password of your own choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special characters) in order to