Quick Start Guide

ECT-B12Fx Quick Start Guide
QSG ECT-B12Fx 031518NA 10
1). Loosen the no. 3 screw to adjust the pan position [0° to
360°]. Tighten the screw after completing the adjustment.
2). Loosen the no. 2 screw to adjust the tilt position [0° to
180°]. Tighten the screw after completing the adjustment.
3). Loosen the no. 1 screw and rotate the camera [0° to 360°].
Tighten the screw after completing the adjustment.
3 Menu Description
Purpose:
Call the menu by clicking the button on the PTZ Control
interface, or click Iris+.
Steps:
1. Connect the camera with the TVI DVR, and the monitor, shown
as figure 3-1.
Figure 3-1 Connection
2. Power on the analog camera, TVI DVR, and the monitor to view
the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking the button, or click Iris+.