EPI-4215-DE3-Quick-start-Guide

QSG EPI-4215-DE3 030518NA 10
Figure 2-2 Disassemble the Speed Dome
2. Install the memory card.
NOTE: a microSD memory card is not included with the camera and must be
purchased separately.
Figure 2-3 Memory Card Slot
3. Drill screw holes in the ceiling.
1) Attach the drill template to the ceiling where you want to install the speed
dome.
2) Cut a hole and drill screw holes according to the drill template.
Note:
±2 mm of the circle diameter is tolerable.
4. Install the toggle bolts.
1) Remove the toggle from the toggle bolt.
2) Insert the bolts into the screw holes on the speed dome as shown in Figure 2-4.