EPI-4215-DE3-Quick-start-Guide

QSG EPI-4215-DE3 030518NA 17
Steps:
1. Open the Web browser.
2. In the browser address bar, input the IP address of the network speed dome, and
enter the login interface.
Note:
The default IP address is 192.168.1.64. You are recommended to change the IP
address to the same subnet as your computer.
3. Input the user name and password.
The admin user should configure the device accounts and user/operator
permissions properly. Delete unnecessary accounts and user/operator permissions.
Note:
The device IP address gets locked if the admin user performs seven failed password
attempts (five attempts for the user/operator).
4. Click Login.
Figure 4-1 Login Interface
5. Install the plug-in before viewing the live video and managing the network speed
dome. Follow the installation prompts to install the plug-in.
Note:
You may have to close the Web browser to finish the installation of the plug-in.
Figure 4-2 Download Plug-in
6. Re-open the Web browser after the installation of the plug-in and repeat the above
step 2 to step 4 to log in.