EPT-4215-D3 TurboHD PTZ Camera Quick Start Guide
EPT-4215-D3 Quick Start Guide Manual Illustrations and Features Graphics (screen shots, product pictures, etc.) in this document are for illustrative purposes only. Your actual product may differ in appearance. Your product might not support all features discussed in this document. Hikvision USA Inc., 18639 Railroad St., City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, Saint Laurent, Quebec, Canada, H4R 2P1 Telephone: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: sales.
EPT-4215-D3 Quick Start Guide ● Do NOT use the wires under excessive tension or compression loading. ● Do NOT drop the camera or subject it to physical shock. ● Do NOT use aggressive or abrasive detergents to clean body of the device. ● Use only accessories recommended by Hikvision. ● Do not expose the camera directly to high concentrations of X-ray, laser, or UV radiation. The direct exposure may cause permanent damage to the image sensor.
EPT-4215-D3 Quick Start Guide Getting Started 1. Install the cameras to the mounting location suggested by Hikvision or on the product data sheet. 2. Plug cameras into the DVRs BNC connectors. 3. Connect the camera power cables. 4. Perform operations with the camera such as live view, PTZ, recording, detection setting, etc. See User Manual, which can be downloaded from www.hikvision.com, for detailed information. NOTE: PTZ control of this camera is achieved using UTC (Up-the-Cable) protocol. 5.
EPT-4215-D3 Quick Start Guide 6. Set the PTZ Protocol field to UTC (Coaxitron). NOTE: UTC (Coaxitron) is Hikvision-C Up-the-Coax (UTC) protocol used exclusively by Hikvision UTC DVRs. This unit will not work with a third-party DVR using the Pelco Coaxitron protocol. Do not change the default camera DIP switch settings, which are set for Hikvision-C protocol use. For specific DIP switch settings, see the EPT-4215-D3 User Manual.
EPT-4215-D3 Quick Start Guide QSG EPT-4215I-D 031518NA 6
