User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 109
• OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port on your demand by
clicking to activate the External Port Settings dialog box.
1. Select Manual in the Mapping Type drop-down list.
2. Click to activate the External Port Settings dialog box. Configure the external port no. for
server port, http port, RTSP port, and https port respectively.
You can use the default port no. or change it according to actual requirements.
External Port indicates the port no. for port mapping in the router.
The value of the RTSP port no. should be 554 or between 1024 and 65535, while the value of the
other ports should be between 1 and 65535 and the values must differ from each other. If multiple
devices are configured for the UPnP™ settings under the same router, the value of the port no. for
each device should be unique.
External Port Settings Dialog Box Figure 9-16
3. Click Apply to save the settings.
4. Click Refresh to get the latest port mapping status.
UPnP™ Settings Finished-Manual Figure 9-17
• Manual Mapping
If your router does not support the UPnP
™
function, perform the following steps to map the port manually.
Before You Start:
Make sure the router supports configuring the internal port and external port in the Forwarding interface.
Go to M
enu > Configuration > Network. 1.