User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 119
Bad Sector Detection
Figure 10-9
Click Error info to see detailed damage information.
4.
You can also pause/resume or cancel the detection as desired.
5.
Configuring HDD Error Alarms
10.4
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Go to Menu > Configuration > Exceptions.
1.
Set the Exception Type to HDD Error on the drop-down list.
2.
Click the checkbox(s) to select the HDD error alarm type(s), as shown in Figure 10-10.
3.
The alarm type can be set to: Audible Warning, Notify Surveillance Center, Send Email, and Trigger
Alarm Output. Refer to Chapter 8.8 Setting Alarm Response Actions.
Configure HDD Error Alarm
Figure 10-10