User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 129
FTP Upgrade Interface Figure 12-9
Enter the FTP Server Address in the text field. 3.
Click Upgrade to start upgrading. 4.
After the upgrading is complete, reboot the NVR to activate the new firmware. 5.
Restoring Default Settings 12.5
Go to Menu > Maintenance > Default. 1.
Restore Defaults Figure 12-10
Select the restore type from the following three options. 2.
• Restore Defaults: Restore all parameters, except the network (including IP address, subnet mask,
gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to
the factory default settings.
• Factory Defaults: Restore all parameters to the factory default settings.
• Restore to Inactive: Restore the device to inactive status.
Click OK to restore the default settings. 3.
The device will reboot automatically after restoring
to the default settings.