User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 132
Configure the following settings: 3.
• Device Name: Edit the name of the NVR.
• Device No.: Edit the serial number of the NVR. The Device No. can be set in the range of 1 to 255, and
the default no. is 255. The number is used for the remote and keyboard control.
• Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes,
then the system will exit from the current operation menu to live view screen after 5 minutes of menu
inactivity.
• Menu Output Mode: Y
ou can choose the menu display on different video outputs. By default, only
HDMI
™
/VGA is selectable.
• Click Apply to save the settings.
Managing User Accounts 13.4
Purpose:
There is a default account in the NVR: Administrator. The Administrator user name is admin and you create
the password when you start the device for the first time. The Administrator has the permission to add and
delete users and configure user parameters.
Adding a User 13.4.1
Go to Menu > Configuration > User. 1.
User Management Interface Figure 13-4
Click Add to enter the Add User interface. 2.