User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 52
Recording Schedule Interface Figure 5-6
• Click the icon to set the accurate time of the schedule.
• To schedule an all-day recording, check the All Day checkbox.
Edit Schedule Figure 5-7
• To arrange other schedule(s), leave the All Day checkbox blank and set the Start/End time.
Up to eight periods can be configured for each day. Time periods cannot overlap.
Select the record type in the drop-down list. 4.
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video
Content Analysis) triggered recording and capture, you must configure the motion detection
settings, alarm input settings or VCA settings as well. For detailed information, refer to Chapter 8.1 ,
Chapter 8.2 , and Chapter 5.5 .
VCA settings are available only to smart IP cameras.
Repeat the above edit schedule steps to schedule recording for other days of the week. Click Copy
to enter the Copy to interface to copy the schedule settings to other days.