User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 84
Chapter 8 Alarm Settings
Setting Motion Detection Alarm 8.1
Go to Menu > Camera > Motion to enter the Camera Management Motion Detection interface and choose 1.
a camera for which to set up motion detection.
Set up detection area and sensitivity. 2.
1) Check the Enable Motion Detection checkbox and use the mouse to draw detection area(s), and drag
the sensitivity bar to set sensitivity.
By default, motion detection is enabled and configured to full screen.
2) Click and set alarm response actions.
Motion Detection Setup Interface Figure 8-1
By default, Dynamic Analysis for Motion is enabled. When the motion is detected, a green frame
identifying moving targets in the motion detection area will be displayed on the live video.
Click Trigger Channel and select one or more channels to record or become full-screen monitoring when 3.
motion alarm is triggered, and click Apply to save the settings.