User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 107
Click Apply to save the settings. 3.
Select the Email tab to enter the Email Settings interface. 4.
E-Mail Settings Interface Figure 9-13
Configure the following e-mail settings: 5.
• Enable Server Authentication (optional): Check the checkbox to enable the server authentication
feature.
• User Name: The user account of sender’s e-mail for SMTP server authentication
• Password: The password of sender’s e-mail for SMTP server authentication
• SMTP Server: T
he SMTP Server IP address or host name (e.g., smtp.263xmail.com)
• SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25.
• Enable SSL/TLS (optional): Check the checkbox to enable SSL/TLS if required by the SMTP server.
• Sender: The name of sender
• Sender’s Address: The e-mail address of sender
• Select Receivers: Select the receiver. Up to three receivers can be configured.
• Receiver: The name of user to be notified
• Receiver’s Address: The e-mail address of the user to be notified
• Test: Send a test message to verify that the SMTP server can be reached.
Click Apply to save the e-mail settings. 6.
Click Test to check your e-mail settings. The corresponding Attention message box will pop up. 7.
Configuring NAT 9.2.6
Purpose:
Two ways are provided for port mapping to realize remote access via the cross-segment network, UPnP™ and
manual mapping.