User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 108
• UPnP
™
Universal Plug and Play (UPnP™) can permit the device to seamlessly discover the presence of other
devices on the network and establish functional network services for data sharing, communications, etc.
You can use the UPnP™ function to enable the fast connection of the device to the WAN via a router
without port mapping.
Before You Start:
To enable the UPnP™ function of the device, you must enable the UPnP™ function of the router to which
your device is connected. When the network working mode of the device is set as multi-address, the
Default Route of the device should be in the same network segment as that of the LAN IP address of the
router.
Go to M
enu > Configuration > Network. 1.
Select NAT to enter the port mapping interface. 2.
UPnP™ Settings Interface Figure 9-14
Check checkbox to enable UPnP™. 3.
Select the Mapping Type as Manual or Auto in the drop-down list. 4.
• OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the
router automatically.
1. Select Auto in the Mapping Type drop-down list.
2. Click Apply to save the settings.
3. You can click Refresh to get the latest port mapping status.
UPnP™ Settings Finished-Auto Figure 9-15