User Manual
ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 112
Enter the destination address in the Destination Address text field.
3.
Click Test to start testing network delay and packet loss. The testing result pops up on the window. If the
4.
testing fails, the error message box will pop up as well.
Exporting Network Packet
9.3.2
Purpose:
By connecting the NVR to a network, the captured network data packet can be exported to a USB flash disk,
SATA, DVD-R/W, or other local backup device.
Go to M
enu > Maintenance > Net Detect.
1.
Click the Network Detection tab to enter the Network Detection interface.
2.
Select the backup device from the Device Name drop-down list, as shown in Figure 9-22.
3.
Click Refresh if the connected local backup device is not displayed. If the backup device cannot be
detected, check whether it is compatible with the NVR. Format the backup device if the format is
incorrect.
Export Network Packet
Figure 9-22
Click Export to start exporting.
4.
After exporting is complete, click OK to finish the packet export, as shown in Figure 9-23.
5.
Packet Export Attention
Figure 9-23
Up to 1 MB of data can be exported each time.