User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 30
The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path].
Example: rtsp://192.168.1.55:554/ch1/main/av_stream.
• Protocol Name: Edit the name for the custom protocol.
• Enable Substream: If the network camera does not support sub-stream or the sub-stream is not
needed leave the checkbox empty.
• Type: T
he network camera adopting custom protocol must support getting stream through standard
RTSP.
• Transfer Protocol: Select the transfer protocol for the custom protocol.
• Port: Set the port no. for the custom protocol.
• Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
The protocol type and the transfer protocols must be supported by the connected network camera.
After adding the customized protocols, the protocol name is listed in the drop-down protocol list.
Protocol Setting Figure 2-30
Choose the protocols you just added to validate the connection of the network camera. 2.
Editing IP Cameras Connected to the PoE Interfaces 2.3.4
The PoE interfaces enable the NVR system to pass electrical power safely, along with data, on
Ethernet cabling to the connected network cameras.
Up to four network cameras can be connected to /4P models, and eight network cameras to /8P
models. If you disable the PoE interface, you can also connect to the online network cameras. The
PoE interface supports the Plug-and-Play function.