User Manual

ERI-Q10x-Px NVR User Manual
UM ERI-Q10x-Px 030118NA 31
To Add Cameras to NVRs that Support the PoE Function
Before You Start:
Connect the network cameras via the PoE interfaces.
Go to Menu > Camera > Camera. 1.
List of Connected Cameras Figure 2-31
Cameras connecting to the PoE interface cannot be deleted in this menu.
Click the icon, and select the Adding Method in the drop-down list. 2.
• Plug-and-Play: This means that the camera is connected to the PoE interface, so in this case, the
camera parameters can’t be edited. The camera’s IP address can be edited only in the Network
Configuration interface, see Chapter 11.1 Configuring General Settings for detailed information.
Edit IP Camera Interface - Plug-and-Play Figure 2-32