Quick Start Guide




R E A R P A N E L S
Figure 2, DS-7604NI-EV1/4P Rear Panel
Figure 3, DS-7608NI-EV2/8P Rear Panel
No.
Item
Description
1
Audio In
RCA
connector
2
Audio Out
RCA
connector
3
VGA
Out
DB
-
15 connector
for VGA output
to d
isplay local video output and
menu
4
HDMI Out
HDMI video output
connector
5
Alarm I/O
A
larm
input
/
output
connectors
6
LAN Interface
Connector for LAN (Local Area Network)
7
USB
USB
port for additional
devices
8
Grounding Screw
Ground (needs to be connected when NVR starts up)
9
Power Input
DS
-
7604
NI
-
E
V
1/4P
: 48 VDC power supply
DS
-
7608NI
-
E
V
2
/8P:
100 to 240 VAC
10
Power Switch
Switch for turning on/off the
device
11
Network Interfaces w/PoE
IP camera input
s
and PoE output
s
1 C O N N E C T D E V I C E S
1. Connect power supply plug (DS-7604NI-EV1/4P) or AC cord (DS-7608NI-EV2/8P) to the NVR.
2. Connect NVR to LAN using Cat 5e cable.
3. Connect video monitor(s) to NVR using HDMI and/or VGA cables, as appropriate.
4. Connect mouse to USB port (wireless mouse can be used in lieu of included mouse).
5. Connect to audio I/O using RCA connectors.
2 S T A R T T H E N V R
1. Plug power cord into 110 VAC outlet (surge suppressor is recommended).
2. Turn power switch on. Power indicator LED will turn green to indicate unit is starting.
3. After startup, power indicator LED will remain green.