User Manual

Network Camera User Manual
89
Capture Threshold
It stands for the quality of face to trigger capture and alarm. Higher value means better quality
should be met to trigger capture and alarm.
Quick Shot
You can define quick shot threshold and max. capture interval.
Quick Shot Threshold
It stands for the quality of face to trigger quick shot.
Face Exposure
Check the checkbox to enable the face exposure.
Reference Brightness
The reference brightness of a face in the face exposure mode. If a face is detected, the camera
adjusts the face brightness according to the value you set. The higher the value, the brighter the
face is.
Minimum Duration
The minimum duration of the camera exposures the face. The default value is 1 minute.
Note
If the face exposure is enabled, please make sure the WDR function is disabled, and the manual
iris is selected.
Face Filtering Time
It means the time interval between the camera detecting a face and taking a capture action. If
the detected face stays in the scene for less than the set filtering time, capture will not be
triggered. For example, if the face filtering time is set as 5 seconds, the camera will capture the
detected face when the face keeps staying in the scene for 5 seconds.
Note
The face filtering time (longer than 0s) may increase the possibility of the actual capture times
less than the set value above.
Restore Default
Click Restore to restore all the settings in advanced configuration to the factory default.
10.1.4 Set Shield Region
The shield region allows you to set the specific region in which the set smart function rule is
invalid.
Steps
1. Select Shield Region.