User Manual

Network Camera User Manual
94
Background Picture Settings
Comparing to target picture, background picture is the scene image offers extra environmental
information. You can set the background picture quality and resolution. If the background image
need to be uploaded to surveillance center, check Background Upload.
People Counting Overlay
Select flow overlay type.
Select the daily reset time. Click Manual Reset if you want to reset right now.
Camera
You can set Device No. and Camera Info. for the camera, which can be overlaid on captured
picture.
Text Overlay
You can check desired items and adjust their order to display on captured pictures by .
The content of Device No. and Camera Info should be on the same page.
10.3.3 Multi-Target-Type Detection Algorithm Parameters
It is used to set and optimize the parameters of the algorithm library for Multi-Target-Type
Detection.
Go to the Configuration → Multi-Target-Type Detection → Advanced Configuration for
configuration.
HMS Version
It refers to the current algorithm version, which cannot be edited.
Restore Defaults
Click Restore to restore all the settings in advanced configuration to the factory default.
Detection Parameters
Generation Speed
It is the speed of deciding whether an object in detection area is a target or not. The higher the
value is, the faster the target will be detected. The default value is recommended.
Sensitivity
It is the sensitivity of recognizing a target. The higher the value is, the easier a target will be
recognized, and the higher possibility of misinformation would be. The default value is
recommended.
Capture Parameters
Best Shot
Capture Threshold
It refers for the quality of face to trigger capture and alarm. Higher value means better quality